Sunday, December 11, 2011

FMQ Pfaff in place...

Pfaff in working mode - I decided to make a pattern and make a tree skirt for our small white tree. Although I thought I had fabric, of course I had nothing really perfect, so off we went to Joann's. Finding a holiday patterned fabric in red and white was perfect, as the decorations are also red and white, plus some gold silver, we got a yard and came on home. I grabbed the large roll of pattern paper, and my trusty long quilting ruler, as well as my design ruler with the nicely curved side. I measured the diameter of the circle I would need, added a tidbit for seaming and then drew right angled diameter lines around the starting line until my perfect circle could be completed using the design ruler. Then I cut the two pieces of fabric - turned out the fabric wasn't quite wide enough so I used a side piece to piece two wedges to complete the circle at the back of the tree skirt. I cut my batting. Then I placed my batting on the wrong side of one piece of the fabric (after sewing the pieced pieces on) and then placed the fabric, right sides together and sewed all around the edge, except for one side of the very back. Then I turned it right side out, smoothed it out, smoothing the batting as well, folded it in fourths to cut a perfect middle hole, and pressed it. Pressed the raw edges into the inside at the open back, and after pressing was ready to FMQ this. The quilting works also to close that back opening, so no other sewing needed there. The quilting went very well, if one doesn't use a microscope to examine my very beginning skill. The process was fun from beginning to end!

2 comments:

The Slapdash Sewist said...

So cute! What a fun, gratifying project. Even better when you get to pull it out again next year.

catspec said...

:) Yes, and it needn't fit me! Thanks for the kind comment.